Building on the success of the duo headlamp ultra-light running Fenix HM65R-DT and Fenix HM65R-T V2.0. This time Fenix brings users a lamp that is more minimalist in design and performance. However Fenix HM62-T headlamp still has enough power and possesses the strengths of a running light from its two seniors.
Fenix HM62-T Headlamp is suitable for night running routes.
What is special about the Fenix HM62-T headlamp?
The Fenix HM62-T headlamp looks a lot like the AA battery-powered HM23 that Fenix released before, but now it's larger, more powerful, and uses rechargeable battery
Fenix HM62-T Headlamp with maximum brightness up to 1200 Lumens
Fenix HM62-T is equipped with a single lens that integrates 2 LEDs inside at the same time, the light can produce White and Red light.
- White light with 1200 lumens capacity, 150 meter beam range, maximum lighting duration of 23 hours and 40 minutes (Medium level).
- Red Light has 5 lumens output with 2 modes including 5 lumens and flashing mode, maximum light duration 60 hours (low level)
Fenix Flashlight HM62-T can respond well to many weather conditions. The lamp gives off Neutral White light with a color temperature of 4500K-5000K. This is an ideal light color close to sunlight, helping to reproduce the color of objects accurately while allowing users to look comfortably for long periods of time without causing eye strain.
Fenix HM62-T Headlamp is suitable for a variety of uses.
Red light is a feature added by Fenix on HM62-T. This allows us to use the light for fishing, camping, and night hunting without attracting the attention of insects and animals. The red flash mode helps warn or identify long-range up to 8 meters.
The HM62-T body is made of Magnesium, the same material as the HM65R-T V2.0 and HM65R-DT models. Using Magnesium makes the lamp 30% lighter than lamps using traditional aluminum alloy.
Fenix HM62-T Ultra-lightweight Headlamp with Magnesium Alloy.
The Fenix HM62-T flashlight uses a single switch to control and access light modes. Users can easily operate it even when operating at high intensity, the operating mechanism is very simple.
Battery indicator LED is integrated on the switch with 2 light colors: red and blue.
Fenix HM62-T Headlamp with Type-C charging port on the battery and battery indicator on the switch.
This is a useful headlamp model. Fenix HM62-T is perfect not only for running activities, the lamp can also be used for camping, trekking, survival or supporting work, repair, technical maintenance... tasks that require a high-performance, minimalist and effective headlamp.
Fenix HM62-T Headlamp has a user-friendly design.
Outstanding features of Fenix HM62-T Flashlight
The Fenix HM62-T headband is equipped with a new BOA buckle, similar to what Fenix did on the HM65R-T V2.0. This is an improvement because it can rotate in both directions to adjust the head size, making it simpler and faster to use than previous BOA buckles.
Fenix HM62-T Headlamp Headband easily adjusts in just 1 second.
The HM62-T's headband uses a large strap with ventilation holes, which helps to ventilate when used and gives the user a comfortable wearing feeling.
A whistle is also integrated on the strap for backup use in cases where it is necessary to send warning signals or communicate with teams at long distances.
The strap on the Fenix HM62-T has an additional reflective strip in the shape of the Fenix logo on the strap that can be detected at a distance of up to 50 meters.
Fenix HM62-T flashlight uses a 3400mAh Li-ion 18650 rechargeable battery. The Type C charging port is equipped on the included battery, the Fenix HM62-T flashlight body does not have a charging port.
Fenix HM62-T Headlamp with 1 large capacity battery helps extend operating time.
According to personal subjective feelings, this is a plus point. The lack of a charging port on the lamp body means that the Fenix HM62-T lamp body is almost completely sealed, ensuring maximum dust and water resistance of the lamp.
The Fenix HM62-T Headlamp is built to be sturdy and tough.
For users when running Trail and camping, trekking... backing up the battery is also a common thing. Users replace the battery to continue using. The batteries will be recharged after completing the trip.
The fact that the Fenix HM62-T does not have a charging port also makes the light cheaper, making it more accessible to the majority of users.
Fenix HM62-T flashlight is equipped with IP68 dust and water resistance, the light can withstand impacts at heights of up to 2 meters on 6 angles.
Fenix HM62-T Headlamp meets IP68 waterproof standards.
Performance/Specifications of Fenix HM62-T Flashlight
The Fenix HM62-T flashlight has a total of 6 brightness levels with very high applicability. Details of brightness, range and operating time at each brightness level are shown in the Runtime table below:
Fenix HM62-T Headlamp with tested specifications.
How to use Fenix HM62-T V2.0 flashlight
Note: Remove the battery insulation seal before first use.
The lamp uses a rubber switch to control all lighting modes.
On/Off:
White light: Press 0.5 seconds to turn on, press 0.5 seconds to turn off.
Red Light: Press twice quickly to turn on, press for 0.5 seconds to turn off.
Switch mode:
White light: press once to change: Low – Med – High – Turbo
Red light: press once to change: Red – Flash.
Fenix HM62-T Headlamp is simple to use with just 1 large switch on the body of the lamp.
Lock function:
Lock: When the light is off, press and hold the switch for 3 seconds, the light will flash 4 times at LOW level of White light to indicate locked status.
Unlock: When the light is locked, press the switch for 3 seconds, the light will be unlocked with 4 flashes in one second and light at LOW level of White light
Check light status: clicking or tapping the switch will trigger 4 flashes per second to indicate locked status.
Charging
Remove the battery to charge. Plug the charging cable into the USB Type C port on the included battery to charge. When the LED on the top of the positive pole turns green, the battery is full.
The typical charging time of the Fenix ARB-L18-3400 Li-ion rechargeable battery is approximately 2.5- 3 hours.
Battery level indicator: On the switch is integrated a small LED indicating the battery level.
When the light is off, press the switch once to check the battery status.
Note: The battery indicator LED will not light up when the light is locked.
1 Led light: 0 – 25%
2 Led light: 25 – 50%
3 Led light: 50 – 75%
4 Led light: 75 – 100%
How to maintain Fenix HM62-T flashlight
Recharge the battery every 4 months to ensure optimal life and performance when not in regular use.
After charging is complete, remove the charging cable and push the dust cover back to protect the charging port from dust and foreign objects.
Notes when using Fenix HM62-T flashlight
Heat will be generated from the lamp body when used for a long time, this is a normal phenomenon.
Do not shine the flashlight directly into your eyes.
Keep out of reach of children!
To ensure safety during long-term use, it is recommended to install a separate handle and avoid direct contact with the lamp body.
Do not shine flammable objects or materials at close range.
Do not disassemble the lamp head yourself to avoid damaging the lamp and voiding the warranty.
Always lock the light when not in use to avoid accidental activation during storage or transport.
Fenix HM62-T flashlight kit includes
Fenix HM62-T Headlamp with product package included.
1 x Fenix Light
1 x Head strap (with light attached)
1 x USB Type-C charging cable
1 x 3400mAh high capacity 18650 rechargeable battery with Type C charging port
1 x Spare gasket
1 x User Manual
