Bộ taro và bàn ren HSS-E VOLKEL 49251 - M3–M20, 52 chi tiết

• Use in workshop production, maintenance, and fabrication where the stated thread designation must be matched accurately.
• Select the tool by the thread system, size, and form stated in the product name before the job begins.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: thread cutting, re tapping, and thread cleaning depending on condition
• Support service workshops, toolrooms, plant maintenance, and general mechanical engineering work.

Note Confirm thread designation, holder concept, and workpiece condition before you start the operation.

• One assortment covers both internal and external thread tasks across the named range.
• Set organization speeds up selection during maintenance and workshop work.
• Useful for service benches where several common thread sizes must stay ready.
• A shared case or set structure improves storage control and completeness checks.

• A set cannot replace a specialized single tool program for every material and production condition.
• It is a workshop set, not a replacement for dedicated production tooling optimized around one thread size.

1. Select the required size and decide whether the job needs an internal or external thread tool from the set.
2. Prepare the hole or outside diameter and secure the workpiece for accurate alignment.
3. Mount the chosen tap or die in the matching holder from the set.
4. Start the thread square to the workpiece and keep the holder under controlled manual guidance.
5. Continue the cut with suitable lubricant and remove chips from the work area as required.
6. Check the finished thread, clean the tool, and return each component to the set after use.

• 1x HSS-E Hand taps (set of 3 pcs.) M 3 (57326)

• 1x HSS-E Hand taps (set of 3 pcs.) M 4 (57330)

• 1x HSS-E Hand taps (set of 3 pcs.) M 5 (57334)

• 1x HSS-E Hand taps (set of 3 pcs.) M 6 (57338)

• 1x HSS-E Hand taps (set of 3 pcs.) M 8 (57342)

• 1x HSS-E Hand taps (set of 3 pcs.) M 10 (57346)

• 1x HSS-E Hand taps (set of 3 pcs.) M 12 (57350)

• 1x HSS-E Hand taps (set of 3 pcs.) M 14 (57354)

• 1x HSS-E Hand taps (set of 3 pcs.) M 16 (57358)

• 1x HSS-E Hand taps (set of 3 pcs.) M 18 (57362)

• 1x HSS-E Hand taps (set of 3 pcs.) M 20 (57366)

• 1x HSS-E Round die M 3 (57426)

• 1x HSS-E Round die M 4 (57430)

• 1x HSS-E Round die M 5 (57434)

• 1x HSS-E Round die M 6 (57438)

• 1x HSS-E Round die M 8 (57442)

• 1x HSS-E Round die M 10 (57446)

• 1x HSS-E Round die M 12 (57450)

• 1x HSS-E Round die M 14 (57454)

• 1x HSS-E Round die M 16 (57458)

• 1x HSS-E Round die M 18 (57462)

• 1x HSS-E Round die M 20 (57466)

• 1x Adjustable tap wrench, zinc die cast No. 1 (13010)

• 1x Adjustable tap wrench, zinc die cast No. 3 (13030)

• 1x Die stock, zinc die cast 20x5 mm (15002)

• 1x Die stock, zinc die cast 20x7 mm (15003)

• 1x Die stock, zinc die cast 25x9 mm (15004)

• 1x Die stock, zinc die cast 30x11 mm (15005)

• 1x Die stock, zinc die cast 38x14 mm (15007)

• 1x Die stock, zinc die cast 45x18 mm (15009)

• Product type: Tap and die assortment
• Thread system: M
• Tool material: HSS-E
• Included groups: hand taps, round dies, die stocks, and tap wrenches