Bàn nguội di động kèm 137 dụng cụ STAHLWILLE 689100 - 7 hộc kéo

Version:

Mobile workbench WB 621 with 7 drawers.

The 2 upper drawers are equipped with a 137-piece Stahlwille tool set, consisting of the following configuration:

Spanners, pliers, 1/4-inch and 1/2-inch sockets, striking tools, circlip pliers, screwdrivers and supplementary articles. The contents of the other 5 drawers can be individually selected. The cabinet section has a height-adjustable storage shelf. The cabinet section and workbench are locked with a common key. 4 keys are supplied. The general-purpose tool selection fits precisely in two-tone PE rigid foam inlays, in which each tool has its own defined place in the workbench. The drawers in the roller cabinet are unlocked using a central locking mechanism with a cylinder lock on the side and a removable key. The workbench has a large work surface with birch marine ply worktop, FSC certified, 1150×500×30 mm. Can be wired using two rubberised feed-throughs and removable cable duct on the rear. With paper roll holder and side hole grid for hooks, e. g. for larger tools. The oil-resistant and acid-resistant wheels (⌀ 125 mm) have fibre shields to protect the bearings against dirt and fibres/threads, with two parking brakes.

Supplied with:

Workbench:

1 pc.

WB 621Spanner set, 22 pieces:

1 pc. each combination spanner No. 613500 size 6; 7; 8; 10; 11; 12;13; 14; 15; 16; 17; 18; 19; 21; 22; 245 pcs. ratchet ring spanner size 8, 10; 13; 17; 19 mm1 pc. single open ended spanner, max.

width across flats 34 mmPliers set, 4 pieces:

1 pc. water pump pliers size 240 mm1 pc. heavy-duty side cutter size 160 mm1 pc. snipe nose pliers size 200 mm1 pc.

combination pliers size 180 mmSocket set, 72 pieces:

1/4 inch + 1/2 inch socket set, 52 pieces1 pc. bit set with 1 pc.

screwdriver holder, 21 piecesStriking tool set, 7 pieces:

1 pc. engineer’s hammer size 500 g1 pc. soft-faced hammer size 35 mm1 pc. flat chisel size 175 mm2 pcs. pin punch size 150×6 mm; 3. 4 mm1 pc. drift punch size 120×4 mm1 pc.

centre punch size 100×10 mmCirclip pliers set, 4 pieces:

4 pcs.

size A21; A2; J2; J21Screwdriver set + supplementary articles, 28 pieces:

3 pcs. screwdriver for slot-head size 2. 5; 4; 10 mm3 pcs. screwdriver for Phillips size PH1; PH2; PH31 pc. L-wrench set for internal Torx®, 8 pcs. 1 pc. hexagon key L-wrench set, 9 pcs. 1 pc. cable knife1 pc. tape measure size 3 m1 pc. wooden folding rule size 2 m1 pc. mini magnetic retriever1 pc.

rod lamp Note:

Tools are supplied loose.

Thông tin kỹ thuật

Bảng thông số kỹ thuật (PDF)