User manual
On/off
Press and hold the side switch for 0.5 seconds to turn the light on/off.
Select brightness level
When the light is on, click the switch once to cycle through Low → Medium → High → Turbo
Flash mode
When the light is on, double-click the switch to enter flash mode, click again to exit flash mode and return to the previously used mode.
Note:
- Disassembling the lamp head may damage the lamp and void the product warranty.
- Fenix recommends using the company's standard batteries to ensure greater safety for the light and the user.
- If the lamp is not used for a long period of time, remove the battery, otherwise the lamp may be damaged due to electrolyte leakage.
- Long-term use may cause wear of the O-ring. To maintain proper waterproofing, replace the O-ring with the replacement part included with the product.
- Regularly cleaning the battery contacts will improve the performance of the light as dirt build-up on the contacts can cause the light to flicker, stay on, or even not light at all for the following reasons:
- A: The battery needs to be replaced.
Solution: Replace the battery (Ensure the battery is installed according to manufacturer specifications) - B: The leads, PCB board contacts or other contact points are dirty.
Solution: Clean the contacts with a cotton swab dipped in rubbing alcohol. - If the above methods do not work, please contact your distributor.
- Fenix bicycle flashlights are high intensity lighting devices that can cause eye damage to the user or others. Avoid shining the light directly into anyone's eyes.
- This flashlight will accumulate a lot of heat when used for a long time, resulting in high temperature of the flashlight. Pay attention to safety to avoid burns.
- Do not shine directly at objects at close range, to avoid burning the object or causing danger due to the high temperature of the lamp.
- The LED of this flashlight is not replaceable; so you should replace the entire flashlight when the LED reaches the end of its life.
Attention:
– Use only the batteries that come with the light or batteries with the same specifications as recommended by the manufacturer.
– Only charge the light with the charging cord provided with the light.
– For small lights, 1 18650, 21700 battery, do not use a high-capacity PD standard charger to charge.
– Damage caused by using batteries or chargers not in accordance with the manufacturer's recommendations is beyond the scope of the warranty.
